A gas chromatographic determination of residues of eleven insecticides and two metabolites on olive tree leaves

A gas chromatographic (GC) method was developed and statistically validated for the simultaneous determination of residues of pyrethroid, endosulfan, and organophosphorus insecticides and some of their metabolites on olive tree leaves. Pesticide residues were extracted by static extraction with acetone-dichloromethane. After evaporation of the extract to dryness and redissolution in acetone, the organophosphorus insecticides were determined by GC with nitrogen-phosphorus detection. Another portion of the extract, after solvent change to acetonitrile, was cleaned up on an Alumina-N cartridge and analyzed for insecticides sensitive to electron-capture detection (ECD), i.e., pyrethroids and endosulfan and its metabolite. Recoveries of the organophosphorus insecticides ranged from 80.7 to 93.3% with relative standard deviations (RSDs) of < or = 7.2%; recoveries of the ECD-sensitive insecticides ranged from 71.6 to 89.5% with RSDs of < or = 11.6%. The method was used to analyze 26 samples of olive tree leaves from organic olive groves all over Greece, and the results confirmed the viability of the method for routine analysis. Residues of fenthion and fenthion sulfoxide were found in one and 3 samples, respectively, and their identities were confirmed by GC with mass spectrometry.     

Efficient Chemoselective Oxidation of Phenylmethanols to Aldehydes with Iodosobenzene

Summary. Primary phenylmethanols are selectively and efficiently oxidized to the corresponding aldehydes by the system C₆H₅IO/(C₆H₅)₄PBr/CH₂Cl₂, T = 298 K under aerobic conditions. The use of the relatively stable iodosobenzene, an iodine(III) compound, in place of the usually employed and potentially explosive iodine(V) reagents, the easy work-up procedure, and the facile recycling of solvent and oxidant provides a convenient and environmentally benign oxidation method.     

Organic functionalization of carbon nanotubes

A very general and versatile method for functionalizing different types of carbon nanotubes is described, using the 1,3-dipolar cycloaddition of azomethine ylides. Approximately one organic group per 100 carbon atoms of the nanotube is introduced, to yield remakably soluble bundles of nanotubes, as seen in transmission electron micrographs. The solubilization of the nanotubes generates a novel, interesting class of materials, which combines the properties of the nanotubes and the organic moiety, thus offering new opportunities for applications in materials science, including the preparation of nanocomposites.     

Vibrational energy transfer in O2(X 3sigma(g)-, upsilon=2,3) + O2 collisions at 330 K

Vibrational relaxation of O2(X 3sigma(g)-, upsilon=2,3) by O2 molecules is studied via a two-laser approach. Laser radiation at 266 nm photodissociates ozone in a mixture of molecular oxygen and ozone. The photolysis step produces vibrationally excited O2(a 1delta(g)) that is rapidly converted to O2(X 3sigma(g)-, upsilon=2,3) in a near-resonant adiabatic electronic energy-transfer process involving collisions with ground-state O2. The output of a tunable 193-nm ArF laser monitors the temporal evolution of the O2(X 3sigma(g)-, upsilon=2,3) population via laser-induced fluorescence detected near 360 nm. The rate coefficients for the vibrational relaxation of O2(X 3sigma(g)-, upsilon=2,3) in collision with O2 are 2.0(-0.4)(+0.6) x 10(-13) cm3 s(-1) and (2.6+/-0.4) x 10(-13) cm3 s(-1), respectively. These rate coefficients agree well with other experimental work but are significantly larger than those produced by various semiclassical theoretical calculations.     

Determination of carbendazim,thiabendazole, and<Emphasis Type="Italic"> o-</Emphasis>phenylphenol residues in lemons by HPLC following sample clean-up by ion-pairing

An efficient analytical method is presented involving effective sample clean-up with solid-phase extraction and HPLC-UV analysis for the simultaneous determination of carbendazim, thiabendazole, and o-phenylphenol residues in lemons. Sample preparation involves extraction with acetonitrile acidified with trifluoroacetic acid and an ethyl acetate/petroleum ether mixture. Purification of the crude extract was carried out with liquid–liquid partitioning after addition of an aqueous ammonia solution. Final clean-up was performed on polymeric reversed-phase cartridges pretreated with sodium dodecyl sulfate. Chromatographic analysis was performed on a reversed-phase HPLC column isocratically eluted with an acetonitrile/water/ammonia mixture and UV detection at 254 nm. The chromatographic method is repeatable, reproducible, and sensitive. Fungicide recoveries from lemon samples fortified at levels of 5 and 1 mg kg^–1 were 81–85% for carbendazim, 96–98% for thiabendazole, and 81–106% for o-phenylphenol with coefficients of variation of 2.5–7.4%. Detection limits for carbendazim, thiabendazole, and o-phenylphenol in lemons were 0.21, 0.27, and 0.51 mg kg^–1, respectively.     

Effect of the aspect ratio of silicate platelets on the mechanical and barrier properties of hydrogenated acrylonitrile butadiene rubber (HNBR)/layered silicate nanocomposites

The role of the aspect ratio of the layered silicate platelets on the mechanical and oxygen permeation properties of hydrogenated nitrile rubber (HNBR)/organophilic layered silicate nanocomposites was investigated. Montmorillonite (MMT) and fluorohectorite (FHT) bearing the same type of intercalant (i.e., octadecylamine; ODA), however, showing different aspect ratio was involved in this study. The dispersion of the layered silicates was assessed by X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. Increasing aspect ratio (MMT < FHT) resulted in higher stiffness under uniaxial tensile loading. The dispersion state (“secondary structure”) of the organophilic layered silicates reduced dramatically the oxygen permeability of the rubber matrix based on the labyrinth principle. The lowest oxygen permeability was measured for the HNBR/FHT-ODA films in which the layered silicates had the highest aspect ratio. By varying the FHT-ODA volume fraction in the latter compound the mechanical and permeation properties were measured and modelled. It was found that the modified Guth’s and Nielsen’s equations predicted accurately the mechanical and permeation responses, respectively.     

Catalytic Reduction of Hydrazine to Ammonia with MoFe(3)S(4)-Polycarboxylate Clusters. Possible Relevance Regarding the Function of the Molybdenum-Coordinated Homocitrate in Nitrogenase

The catalytic function of the previously synthesized and characterized [(L)MoFe(3)S(4)Cl(3)](2)(-)(,3)(-) clusters (L = tetrachlorocatecholate, citrate, citramalate, methyliminodiacetate, nitrilotriacetate, thiodiglycolate) and of the [MoFe(3)S(4)Cl(3)(thiolactate)](2)(4)(-) and [(MoFe(3)S(4)Cl(4))(2)(&mgr;-oxalate)](4)(-) clusters in the reduction of N(2)H(4) to NH(3) is reported. In the catalytic reduction, which is carried out at ambient temperature and pressure, cobaltocene and 2,6-lutidinium chloride are supplied externally as electron and proton sources, respectively. In experiments where the N(2)H(4) to the [(L)MoFe(3)S(4)Cl(3)](n)()(-) catalyst ratio is 100:1, and over a period of 30 min, the reduction proceeds to 92% completion for L = citrate, 66% completion for L = citramalate, and 34% completion for L = tetrachlorocatecholate. The [Fe(4)S(4)Cl(4)](2)(-) cluster is totally inactive and gives only background ammonia measurements. Inhibition studies with PEt(3) and CO as inhibitors show a dramatic decrease in the catalytic efficiency. These results are consistent with results obtained previously in our laboratory and strongly suggest that N(2)H(4) activation and reduction occur at the Mo site of the [(L)MoFe(3)S(4)Cl(3)](2)(-)(, 3)(-) clusters. A possible pathway for the N(2)H(4) reduction on a single metal site (Mo) and a possible role for the carboxylate ligand are proposed. The possibility that the Mo-bound polycarboxylate ligand acts as a proton delivery "shuttle" during hydrazine reduction is considered.     

Determination of spiroxamine residues in grapes, must, and wine by gas chromatography/ion trap-mass spectrometry

Analytical methodology was developed and validated for the determination of spiroxamine residues in grapes, must, and wine by gas chromatography/ion trap-mass spectrometry (GC/IT-MS). Two extraction procedures were used: the first involved grapes, must, and wine extraction with alkaline cyclohexane-dichloromethane (9 + 1, v/v) solution, and the second grape extraction with acetone, dichloromethane, and petroleum ether. In both procedures, the extract was centrifuged, evaporated to dryness, and reconstituted in cyclohexane or 2,2,4-trimethylpentane-toluene (9 + 1, v/v), respectively. Spiroxamine diastereomers A and B were determined by GC/IT-MS, and a matrix effect was observed in the case of grapes but not in must and wine. Recovery of spiroxamine from fortified samples at 0.02 to 5.0 mg/kg ranged from 78-102% for grapes and must, with relative standard deviation (RSD) <13%; for red and white wines, recoveries ranged from 90 to 101% with RSD <9%. The limit of quantification was 0.02 mg/kg for grapes, must, and wine or 0.10 mg/kg for grapes, depending on the extraction procedure used.